This is discussed at http://wso2.org/project/wsf/php/2.1.0/docs/install_guide.html. However, I was informed that there are some issues in following the steps as discussed. Hence I am elaborating the steps a bit further, addressing the issues reported.
To install, you will need OpenSSL and PHP-5.2.0 or later - the dev version.
sudo apt-get install openssl
sudo apt-get install apache2
sudo apt-get install php5
sudo apt-get install libapache2-mod-php5
sudo apt-get install php5-cli
sudo /etc/init.d/apache2 restart
sudo apt-get install php5
sudo apt-get install libapache2-mod-php5
sudo apt-get install php5-cli
sudo /etc/init.d/apache2 restart
Now ./configure.
You might encounter the below issue, if you haven't given the path of php5 to configure.
pradeeban@pradeeban:~/wso2/wso2-wsf-php-src-2.1.0$ ./configure
./configure: line 755: php-config: command not found
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... none
checking how to run the C preprocessor... gcc -E
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
./configure: line 20203: --extension-dir: command not found
checking for dlopen in -ldl... yes
checking for inflate in -lz... yes
checking for ANSI C header files... (cached) yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for net/if.h... yes
checking for linux/if.h... yes
checking net/if_types.h usability... no
checking net/if_types.h presence... no
checking for net/if_types.h... no
checking net/if_dl.h usability... no
checking net/if_dl.h presence... no
checking for net/if_dl.h... no
checking sys/appleapiopts.h usability... no
checking sys/appleapiopts.h presence... no
checking for sys/appleapiopts.h... no
checking whether to build rampart ... yes
checking whether to build libxml2 xml parser library... checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
no
checking whether to build guththila xml parser library... no
checking whether to use apache2 as server transport... no
checking whether to use apr. Note that if you build with apache2 you might need to do this.... no
checking whether to build tests... no
checking whether to enable trace... no
checking whether to enable multi threading... yes
checking whether to use openssl... yes
checking whether to build dynamic invocation client library... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing wsf commands
config.status: executing php commands
./config.status: line 1235: phpize: command not found
=== configuring in src (/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/wsf_c' --cache-file=/dev/null --srcdir=.
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking for cc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking how to run the C preprocessor... cc -E
checking for icc... no
checking for suncc... no
checking whether cc understands -c and -o together... yes
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
configure: error: Cannot find php-config. Please use --with-php-config=PATH
configure: error: ./configure failed for src
./configure: line 755: php-config: command not found
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... none
checking how to run the C preprocessor... gcc -E
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
./configure: line 20203: --extension-dir: command not found
checking for dlopen in -ldl... yes
checking for inflate in -lz... yes
checking for ANSI C header files... (cached) yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for net/if.h... yes
checking for linux/if.h... yes
checking net/if_types.h usability... no
checking net/if_types.h presence... no
checking for net/if_types.h... no
checking net/if_dl.h usability... no
checking net/if_dl.h presence... no
checking for net/if_dl.h... no
checking sys/appleapiopts.h usability... no
checking sys/appleapiopts.h presence... no
checking for sys/appleapiopts.h... no
checking whether to build rampart ... yes
checking whether to build libxml2 xml parser library... checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
no
checking whether to build guththila xml parser library... no
checking whether to use apache2 as server transport... no
checking whether to use apr. Note that if you build with apache2 you might need to do this.... no
checking whether to build tests... no
checking whether to enable trace... no
checking whether to enable multi threading... yes
checking whether to use openssl... yes
checking whether to build dynamic invocation client library... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing wsf commands
config.status: executing php commands
./config.status: line 1235: phpize: command not found
=== configuring in src (/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/wsf_c' --cache-file=/dev/null --srcdir=.
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking for cc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking how to run the C preprocessor... cc -E
checking for icc... no
checking for suncc... no
checking whether cc understands -c and -o together... yes
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
configure: error: Cannot find php-config. Please use --with-php-config=PATH
configure: error: ./configure failed for src
You can fix this by using,
./configure --with-php-config=/usr/bin/php5
Now you can go ahead and "make". However, make sure that you have php5 dev-version for building. Otherwise, it will fail as below.
Now you can go ahead and "make". However, make sure that you have php5 dev-version for building. Otherwise, it will fail as below.
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c'
Making all in src
make[2]: Entering directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f] [--] [args...] php5 [options] -r
Making all in src
make[2]: Entering directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f]
[--] [args...] php5 [options] [-B ] -R [-E ] [--] [args...] php5 [options] [-B ] -F [-E ] [--] [args...] php5 [options] -- [args...] php5 [options] -a -a Run as interactive shell -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse and execute . -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -r Run PHP without using script tags -B Run PHP before processing input lines -R Run PHP for every input line -F Parse and execute for every input line -E Run PHP after processing all input lines -H Hide any passed arguments from external tools. -s Output HTML syntax highlighted source. -v Version number -w Output source with stripped comments and whitespace. -z Load Zend extension . args... Arguments passed to script. Use -- args when first argument starts with - or script is read from stdin --ini Show configuration file names --rf Show information about function . --rc Show information about class . --re Show information about extension . --ri Show configuration for extension . -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -c /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/wsf.c -o wsf.lo
/bin/bash: -c: line 0: syntax error near unexpected token `<'
/bin/bash: -c: line 0: `/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f] [--] [args...] php5 [options] -r [--] [args...] php5 [options] [-B ] -R [-E ] [--] [args...] php5 [options] [-B ] -F [-E ] [--] [args...] php5 [options] -- [args...] php5 [options] -a -a Run as interactive shell -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse and execute . -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -r Run PHP without using script tags -B Run PHP before processing input lines -R Run PHP for every input line -F Parse and execute for every input line -E Run PHP after processing all input lines -H Hide any passed arguments from external tools. -s Output HTML syntax highlighted source. -v Version number -w Output source with stripped comments and whitespace. -z Load Zend extension . args... Arguments passed to script. Use -- args when first argument starts with - or script is read from stdin --ini Show configuration file names --rf Show information about function . --rc Show information about class . --re Show information about extension . --ri Show configuration for extension . -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -c /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/wsf.c -o wsf.lo '
make[2]: *** [wsf.lo] Error 1
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0'
make: *** [all] Error 2
This is because of the missing phpize.
sudo apt-get install php-pear
sudo apt-get install php5-dev
sudo apt-get install php-pear
sudo apt-get install php5-dev
Once installed phpize, make sure to configure again.
./configure --with-php-config=/usr/bin/php5
In other words, follow the previous steps that you did, to make sure everything is configured fine.
Now you can "make" and "make install". You might have to "sudo make" and "sudo make install" based on the permission and the preferred location.
Now you can "make" and "make install". You might have to "sudo make" and "sudo make install" based on the permission and the preferred location.
If "make" fails as,
make[3]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c'
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c'
Making all in src
make[2]: Entering directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=link cc -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -o wsf.la -export-dynamic -avoid-version -prefer-pic -module -rpath /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/modules wsf.lo wsf_xml_msg_recv.lo wsf_util.lo wsf_stream.lo wsf_worker.lo wsf_out_transport_info.lo wsf_client.lo wsf_policy.lo wsf_wsdl.lo -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -lsandesha2_client -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -lneethi_util -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -lneethi -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -lmod_rampart -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -laxis2_http_receiver -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -laxis2_http_sender -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -laxutil -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -laxis2_engine -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -laxis2_axiom -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -laxis2_parser
libtool: link: cc -shared .libs/wsf.o .libs/wsf_xml_msg_recv.o .libs/wsf_util.o .libs/wsf_stream.o .libs/wsf_worker.o .libs/wsf_out_transport_info.o .libs/wsf_client.o .libs/wsf_policy.o .libs/wsf_wsdl.o -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -Wl,-rpath -Wl,/usr/lib/php5/20090626/wsf_c/lib -Wl,-rpath -Wl,/usr/lib/php5/20090626/wsf_c/modules/rampart -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs/libsandesha2_client.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs/libneethi_util.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs/libneethi.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs/libmod_rampart.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs/libaxis2_http_receiver.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs/libaxis2_http_sender.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs/libaxutil.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs/libaxis2_engine.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs/libaxis2_axiom.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -laxis2_parser -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -Wl,-soname -Wl,wsf.so -o .libs/wsf.so
/usr/bin/ld: cannot find -laxis2_parser
collect2: ld returned 1 exit status
make[2]: *** [wsf.la] Error 1
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0'
make: *** [all] Error 2
Export the path of wsf_c/lib.
export LD_LIBRARY_PATH=/usr/lib/php5/20090626/wsf_c/lib/
make[3]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c'
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c'
Making all in src
make[2]: Entering directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=link cc -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -o wsf.la -export-dynamic -avoid-version -prefer-pic -module -rpath /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/modules wsf.lo wsf_xml_msg_recv.lo wsf_util.lo wsf_stream.lo wsf_worker.lo wsf_out_transport_info.lo wsf_client.lo wsf_policy.lo wsf_wsdl.lo -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -lsandesha2_client -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -lneethi_util -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -lneethi -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -lmod_rampart -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -laxis2_http_receiver -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -laxis2_http_sender -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -laxutil -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -laxis2_engine -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -laxis2_axiom -Wl,-rpath,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -laxis2_parser
libtool: link: cc -shared .libs/wsf.o .libs/wsf_xml_msg_recv.o .libs/wsf_util.o .libs/wsf_stream.o .libs/wsf_worker.o .libs/wsf_out_transport_info.o .libs/wsf_client.o .libs/wsf_policy.o .libs/wsf_wsdl.o -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -Wl,-rpath -Wl,/usr/lib/php5/20090626/wsf_c/lib -Wl,-rpath -Wl,/usr/lib/php5/20090626/wsf_c/modules/rampart -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs/libsandesha2_client.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs/libneethi_util.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs/libneethi.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs/libmod_rampart.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs/libaxis2_http_receiver.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs/libaxis2_http_sender.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs/libaxutil.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs/libaxis2_engine.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs/libaxis2_axiom.so -L/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -laxis2_parser -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/src/client/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/src/core/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/receiver/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/transport/http/sender/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/src/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/src/core/engine/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/om/.libs -Wl,-rpath -Wl,/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/src/parser/libxml2/.libs -Wl,-soname -Wl,wsf.so -o .libs/wsf.so
/usr/bin/ld: cannot find -laxis2_parser
collect2: ld returned 1 exit status
make[2]: *** [wsf.la] Error 1
make[2]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0'
make: *** [all] Error 2
Export the path of wsf_c/lib.
export LD_LIBRARY_PATH=/usr/lib/php5/20090626/wsf_c/lib/
This will fix the make issues. Now you should be able to make and make install.
Edit /etc/php5/apache2/php.ini
Add the lines,
Add the lines,
extension=wsf.so
extension=xsl.so
extension=xsl.so
Copy all the samples to your Web server's document root. Now the samples will be in a folder as /var/www/samples.
Test with a Web browser. For example, access http://localhost/samples/echo_client.php
did you do it on the desktop or server variant
ReplyDeleteDesktop..
ReplyDeleteRegards,
Pradeeban.
this path dont exist
ReplyDeleteusr/lib/php5/20090626/wsf_c/lib/
how is it created
Are you following the listed steps? What happens when you try to "make"? Can you post the exact logs?
ReplyDeleteHi Pradeeban,
ReplyDeleteI'v try to follow the listed steps, but I still have problem here :
I do make :
/bin/sh: -c: line 0: Erreur de syntaxe près du symbole inattendu « < »
make[2]: *** [wsf.lo] Erreur 1
so in english :
Syntax error near unexpected token "<"
seems that phpize missing, but I'v installed it :
~/wso2-wsf-php-src-2.1.0# sudo apt-get install php-pear
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
php-pear est déjà la plus récente version disponible.
sorry I'm French, but it says that all is ok, php-pear is installed with the latest version.
Same for php--dev, the latest version is up to date.
So what's wrong ? Have you an idea ?
Thanks in advance,
Best Regards,
Christian
Hi Christian,
ReplyDeleteWhat is your operating system? Is it Ubuntu 10.04?
If you check the error that I mentioned, it is
/bin/bash /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/main -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f] [--] [args...] php5 [options] -r [--] [args...] php5 [options] [-B ] -R [-E ] [--] [args...] php5 [options] [-B ] -F [-E ] [--] [args...] php5 [options] -- [args...] php5 [options] -a -a Run as interactive shell -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse and execute . -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -r Run PHP without using script tags -B Run PHP before processing input lines -R Run PHP for every input line -F Parse and execute for every input line -E Run PHP after processing all input lines -H Hide any passed arguments from external tools. -s Output HTML syntax highlighted source. -v Version number -w Output source with stripped comments and whitespace. -z Load Zend extension . args... Arguments passed to script. Use -- args when first argument starts with - or script is read from stdin --ini Show configuration file names --rf Show information about function . --rc Show information about class . --re Show information about extension . --ri Show configuration for extension . -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -c /home/pradeeban/wso2/wso2-wsf-php-src-2.1.0/src/wsf.c -o wsf.lo
/bin/bash: -c: line 0: syntax error near unexpected token `<'
Can you confirm that the error are exactly the same? In my case, it was missing phpize. Can be due to some other missing dependency that is already in my system, in your case.
If you can paste the entire log, we can look further and see whether it is something else.
Regards,
Pradeeban.
Hi Pradeeban,
ReplyDeleteThanks a lot for your prompt answer.
Before you answered me, I'v re-install entirely my server, in english.
It is Ubuntu 10.04.4 LTS
I'v installed webmin,virtualmin too.
Here is the complete log when doing "make" :
Making all in src
make[2]: Entering directory `/root/wso2-wsf-php-src-2.1.0/src'
/bin/sh /root/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/root/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/root/wso2-wsf-php-src-2.1.0/src/include -I/root/wso2-wsf-php-src-2.1.0/src/main -I/root/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f] [--] [args...] php5 [options] -r [--] [args...] php5 [options] [-B ] -R [-E ] [--] [args...] php5 [options] [-B ] -F [-E ] [--] [args...] php5 [options] -- [args...] php5 [options] -a -a Run as interactive shell -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse and execute . -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -r Run PHP without using script tags -B Run PHP before processing input lines -R Run PHP for every input line -F Parse and execute for every input line -E Run PHP after processing all input lines -H Hide any passed arguments from external tools. -s Output HTML syntax highlighted source. -v Version number -w Output source with stripped comments and whitespace. -z Load Zend extension . args... Arguments passed to script. Use -- args when first argument starts with - or script is read from stdin --ini Show configuration file names --rf Show information about function . --rc Show information about class . --re Show information about extension . --ri Show configuration for extension . -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/root/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -c /root/wso2-wsf-php-src-2.1.0/src/wsf.c -o wsf.lo
/bin/sh: -c: line 0: syntax error near unexpected token `<'
make[2]: *** [wsf.lo] Error 1
make[2]: Leaving directory `/root/wso2-wsf-php-src-2.1.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/wso2-wsf-php-src-2.1.0'
make: *** [all] Error 2
Thanks for your help,
Best Regards,
Christian
Don't know if my post was sent, I resend it again, maybe you'll have the same twice !
ReplyDeleteHi Pradeeban,
Thanks a lot for your prompt answer.
Before you answered me, I'v re-install entirely my server, in english.
It is Ubuntu 10.04.4 LTS
I'v installed webmin,virtualmin too.
Here is the complete log when doing "make" :
Making all in src
make[2]: Entering directory `/root/wso2-wsf-php-src-2.1.0/src'
/bin/sh /root/wso2-wsf-php-src-2.1.0/src/libtool --mode=compile cc -I. -I/root/wso2-wsf-php-src-2.1.0/src -DPHP_ATOM_INC -I/root/wso2-wsf-php-src-2.1.0/src/include -I/root/wso2-wsf-php-src-2.1.0/src/main -I/root/wso2-wsf-php-src-2.1.0/src Usage: php5 [options] [-f] [--] [args...] php5 [options] -r [--] [args...] php5 [options] [-B ] -R [-E ] [--] [args...] php5 [options] [-B ] -F [-E ] [--] [args...] php5 [options] -- [args...] php5 [options] -a -a Run as interactive shell -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse and execute . -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -r Run PHP without using script tags -B Run PHP before processing input lines -R Run PHP for every input line -F Parse and execute for every input line -E Run PHP after processing all input lines -H Hide any passed arguments from external tools. -s Output HTML syntax highlighted source. -v Version number -w Output source with stripped comments and whitespace. -z Load Zend extension . args... Arguments passed to script. Use -- args when first argument starts with - or script is read from stdin --ini Show configuration file names --rf Show information about function . --rc Show information about class . --re Show information about extension . --ri Show configuration for extension . -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/util/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/axiom/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/rampartc/include -I/root/wso2-wsf-php-src-2.1.0/wsf_c/axis2c/neethi/src/util -I/root/wso2-wsf-php-src-2.1.0/wsf_c/sandesha2c/include -I/usr/include/libxml2 -DHAVE_CONFIG_H -g -O2 -c /root/wso2-wsf-php-src-2.1.0/src/wsf.c -o wsf.lo
/bin/sh: -c: line 0: syntax error near unexpected token `<'
make[2]: *** [wsf.lo] Error 1
make[2]: Leaving directory `/root/wso2-wsf-php-src-2.1.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/wso2-wsf-php-src-2.1.0'
make: *** [all] Error 2
Thanks for your help,
Best Regards,
Christian
Hi Christian,
ReplyDeleteAs you have installed phpize, can you make sure to configure again.
Example,
./configure --with-php-config=/usr/bin/php5
In other words, follow the previous steps that you did, to make sure everything is configured fine.
After doing from the beginning like this, pls let me know if this issue still exists.
Regards,
Pradeeban.
Hello,
ReplyDeletethis topic is really old, but maybe it's still active.
I have the same problem and also could not compile.
I noticed, that some variables in the src/Makefile contains those "Usage: PHP5 ...." stuff.
My error is the same and all libs menioned above are installed.
So how could I find out, what is missing? I'm using Ubuntu 12.04.4
Regards,
Chris
Hi Chris,
ReplyDeleteI am afraid I don't have the source code or configuration of this with me anymore. I would recommend you post the question to http://stackoverflow.com/questions/tagged/wso2
Regards,
Pradeeban.